Community discussions

MUM Europe 2020
 
harisagars
newbie
Topic Author
Posts: 41
Joined: Wed Nov 03, 2010 7:47 am

restrict 3mb to 450g for one Ethernet

Wed Sep 14, 2011 8:57 pm

I am using 450g for bandwidth restriction already i have restricted 2 mb on one Ethernet which is in the list of Bandwidth (tx/Rx) and on the same Ethernet i want to restrict to 3 mb but there is no 3mb option available in list give any solution to restrict 3mb on the Ethernet .i have attached jpeg
ethernet.JPG
You do not have the required permissions to view the files attached to this post.
 
fewi
Forum Guru
Forum Guru
Posts: 7734
Joined: Tue Aug 11, 2009 3:19 am

Re: restrict 3mb to 450g for one Ethernet

Wed Sep 14, 2011 9:03 pm

Hit the wiki manual and start reading about QoS and queues.
Specific answers require specific questions. When in doubt, post the output of "/ip address print detail", "/ip route print detail", "/interface print detail", "/ip firewall export", and an accurate network diagram.
 
Feklar
Forum Guru
Forum Guru
Posts: 1726
Joined: Tue Dec 01, 2009 11:46 pm

Re: restrict 3mb to 450g for one Ethernet

Wed Sep 14, 2011 9:11 pm

Fewi is right, QoS a better solution. You can also type whatever value you want into that field by hand.
 
harisagars
newbie
Topic Author
Posts: 41
Joined: Wed Nov 03, 2010 7:47 am

Re: restrict 3mb to 450g for one Ethernet

Thu Sep 15, 2011 4:46 pm

I have tried to put manually but the error is coming like this i have tried a lot
123.JPG
You do not have the required permissions to view the files attached to this post.
 
kirshteins
MikroTik Support
MikroTik Support
Posts: 592
Joined: Tue Dec 02, 2008 10:55 am

Re: restrict 3mb to 450g for one Ethernet

Fri Sep 16, 2011 11:03 am

This is hardware feature of this board and 3M value cannot be supported.

Who is online

Users browsing this forum: No registered users and 24 guests