Hi guys im new @ mikrotik, i know some basic configuration with LAn interfaces.

could anybody gave me commands or configuration for this Settings in the picture..

Distance between RouterBoard1 & RouterBoard2 is 5km
RouterBoards = 2.4Ghz
=========================================================================================
Please could anybody send me the configuration of Each Hardware or Interface , THANKS in Advance.
=========================================================================================

I Got thouse 2 RB's RB433

Hi, are you building this all from scratch or are you using existing equipment?

1hr30mins isn't along time, especially on the weekend.

JJOliver998

Also can you give some idea about that link, LOS etc?

**edited as you already said how far, whoops**

Also, can you tell us what our trying to achieve with RB1, is it accessible by other devices, any freq presences? Whats the noise like in your area etc etc. basically the diagram is great but doesn't give much detail.

Also, sorry I see that its a 5k link. Sorry.......

=========================================================================================
Please could anybody send me the configuration of Each Hardware or Interface , THANKS in Advance.
=========================================================================================

Most people aren't going to do this for free. You should probably hire a consultant.

=========================================================================================
Please could anybody send me the configuration of Each Hardware or Interface , THANKS in Advance.
=========================================================================================

Most people aren't going to do this for free. You should probably hire a consultant.

Hmmmmmmmmmmmmmmm....
How much money make?

you need to setup a wireless bridge for router1 &2. then in router 2 set the second wireless interface(which connects to Omni antenna) as ap bridge
your wireless clients works as station.

give us more info about your devices.

Does the router with IP address 192.168.2.32 as a DHCP server is running?
how much distance between the two stations?

The Modem is my ISP provider on my FLAT, but I will share the Internet to my second house in the vilage , and I thought I could do it with

2 routerboards
1 Omni ???

the Omni is for my laptop wen I go to the lake sometimes , and I need wireless there,
and the Switch is for my Desktop PC,

but I paint it that way cuz i thought you understand that better,

and sorry but I dont have money to pay. thats why I came here cuz im lookfing for some free help, and if someone know's how to configure that, please PM me or post some simple steps,

I have automatic IP's on my MODEM, but i could change them to static IP .

Also, can you tell us what our trying to achieve with RB1, is it accessible by other devices, any freq presences? Whats the noise like in your area etc etc. basically the diagram is great but doesn't give much detail.

hmm I thought I could share the Internet "From MODEM>TO>ROUTERBOARD1>TO>ROUTERBOARD2>TO>OMNI & Swich"
RB1 must accept only me if I want to connect via winbox or telnet, but not clients or anything only the OMNI must accept clients.

Does the router with IP address 192.168.2.32 as a DHCP server is running?
how much distance between the two stations?

The distance between 2 RouterBoards is about 7-10km.


Thanks in advance!!
msn: joloqk@live.com
skype: qeshmjaa

Please Guy's post some tips or something....... I need that configuration badly.

I would not achieve the long-distance links in 2.4 GHz, but the 5 GHz frequency.
side a groove A-5HN with 24 dB panel antenna in wireless and wired bridge.

B side you can use routerbaord 433 Ah to 2.4 GHz for uplink and one MiniPCI groove 5HN A panel antenna with 24 dB. This if you have a natural line of sight
For 2.4 ghz client access a 2.4 ghz minipci
For 5 ghz uplink use a groove A-5HN with 24 dB pannel antenna. Why this groove's for the fast link speed.
You can also use a 5 ghz mini pci but the speed sal down.

thank's but could anybody send me more detailed information,??

Can I change the BAND: to 5Ghz even if I have 2.4Ghz mini PCI cards ??

thank's but could anybody send me more detailed information,??

Can I change the BAND: to 5Ghz even if I have 2.4Ghz mini PCI cards ??

No, You can't do that. It is not only refer to Mini Pci card but also to your antenna. your antenna must be able to work on that frequency too.
Some mini pci like R52 and R52H are able to work on 5GHz and 2.4GHz.

sadeghrafie could I make u some questions plzzzz.

my skypeID is: qeshmjaa
or past me yours... thanks