how enable 4500 port on rb450g ?
I`m trying,but its immpossible?Need this port on little game..Help
Re: how enable 4500 port on rb450g ?
please show your current config:
Code: Select all
/ip firewall natCode: Select all
/ip firewall filter
Re: how enable 4500 port on rb450g ?
Hi Morkis
Welcome to the Forum.
But until you give us a clue how your 450g is setup, we can't help you much further? Is there a xDSL modem between your internet and the router? Have you configured any firewall rules to block such traffic? Have you in fact, added any specific rules to allow this traffic to get to a specific PC on your network? Is this for TCP or UDP traffic?
I know, so many questions... and no answer! But until you tell us how your router and your network is setup, we just have to guess. That wastes ours and your time with us both getting nowhere fast.
Welcome to the Forum.
But until you give us a clue how your 450g is setup, we can't help you much further? Is there a xDSL modem between your internet and the router? Have you configured any firewall rules to block such traffic? Have you in fact, added any specific rules to allow this traffic to get to a specific PC on your network? Is this for TCP or UDP traffic?
I know, so many questions... and no answer! But until you tell us how your router and your network is setup, we just have to guess. That wastes ours and your time with us both getting nowhere fast.
Re: how enable 4500 port on rb450g ?
please show your current config:Code: Select all/ip firewall natCode: Select all/ip firewall filter
[admin@MikroTik] > /ip firewall filter print
Flags: X - disabled, I - invalid, D - dynamic
0 ;;; default configuration
chain=input action=accept protocol=icmp
1 ;;; default configuration
chain=input action=accept connection-state=established
2 ;;; default configuration
chain=input action=accept connection-state=related
3 chain=input action=accept protocol=tcp in-interface=WAN dst-port=88
4 ;;; default configuration
chain=input action=drop src-address=!84.55.46.50 in-interface=WAN
[admin@MikroTik] > /ip firewall nat print
Flags: X - disabled, I - invalid, D - dynamic
0 ;;; default configuration
chain=srcnat action=masquerade out-interface=WAN
1 ;;; utorrent
chain=dstnat action=dst-nat to-addresses=192.168.88.247 to-ports=55158 protocol=tcp dst-port=55158
2 chain=dstnat action=dst-nat to-addresses=192.168.88.247 to-ports=4500 protocol=tcp dst-port=4500
Usually I can open it, but it was these can not :/
Maybe possible create to copy paste script,or something like that?
EDIT: Ahh my firewall failed,working now but one internal ip...
Now how to make that go in all internal IP addresses in my game?
Re: how enable 4500 port on rb450g ?
You can't, unless you allocate a separate public IP to each internal user that needs that IP mapping to them.Now how to make that go in all internal IP addresses in my game?