I am new at this and am having issues with basic connectivity between the computer and the 411ah board.
411ah board`s ether1 is connected to my computer.
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::ed1d:ec63:b4f9:d27%10
IPv4 Address. . . . . . . . . . . : 188.8.131.52
Subnet Mask . . . . . . . . . . . : 255.255.224.0
Default Gateway . . . . . . . . . : 184.108.40.206
IP`s I assigned to the board:
ether1 : 220.127.116.11
The issue is I can`t connect into WinBox using ether1`s IP(18.104.22.168). Putting the address in the browser doesnt work either. I tried to ping the computer from WinBox(logged in using MAC) and doesnt work either and vice-versa.
To help you understand the complete picture here is what I am trying to acomplish:
[Network Device(ex. Camera)] ------------ [411AH(2)]- - - - -Wireless- - - - - -[411AH(1)]-----------[Computer]
I am planning on making
- 411AH(2) an ap bridge
- 411AH(1) a switch
Another question I had was, would I be able to connect to 411AH(2) from the Computer?
Also I am using 900MHz cards on both boards if that makes a difference.
Anyone please pitch in with any suggestions and clarifications. Any help would be greatly appriciated.