Community discussions

MUM Europe 2020
 
User avatar
ohara
Member
Member
Topic Author
Posts: 371
Joined: Mon Jun 13, 2011 11:30 pm
Location: Warsaw

couldn't continue - modem did not respond

Wed May 09, 2012 10:46 am

I connect Huawei E3131 to RB751G via USB. I can establish internet connection through ppp-out1 interface, which is fine.

Problem is that I can't see PPP Info details like Current Operator, Signal Strength. When I click on 'Info...' button in PPP Info screen I get the following error message:
Couldn't continue - modem did not respond (6)
Appreciate if somebody could give me advice if this is a matter of the 3G modem itself or ROS configuration.
 
MartT
just joined
Posts: 1
Joined: Sat Sep 22, 2012 5:47 pm

Re: couldn't continue - modem did not respond

Sat Sep 22, 2012 5:53 pm

hi

Did you get the Huawei E3131 working?

I found a topic where it is said that you should make a Support Output File and send it to Mikrotik support.

http://forum.mikrotik.com/viewtopic.php?p=92917#p92917
http://wiki.mikrotik.com/wiki/Manual:Su ... utput_File


I have the Huawei E3131 and searched if it is compatible with Mikrotik, this thread is the closest thing that i found.
 
aprzybylski
just joined
Posts: 2
Joined: Tue Jul 19, 2011 1:37 pm

Re: couldn't continue - modem did not respond

Wed Feb 20, 2013 11:19 pm

I connect Huawei E3131 to RB751G via USB. I can establish internet connection through ppp-out1 interface, which is fine.

Problem is that I can't see PPP Info details like Current Operator, Signal Strength. When I click on 'Info...' button in PPP Info screen I get the following error message:
Couldn't continue - modem did not respond (6)
Appreciate if somebody could give me advice if this is a matter of the 3G modem itself or ROS configuration.
Hello, what I need to do to run the E3131 on Mikrotik? For me is the lack of ports. Thanks.
 
tails142
just joined
Posts: 1
Joined: Wed Jul 24, 2013 11:42 am

Re: couldn't continue - modem did not respond

Wed Jul 24, 2013 11:44 am

You will need to disable the hilink feature of the E3131. Steps can be found at: http://blog.phoenixhaven.net/2012/09/11 ... lup-modem/
 
Ehman
Member
Member
Posts: 363
Joined: Mon Nov 15, 2010 10:49 pm

Re: couldn't continue - modem did not respond

Thu Oct 03, 2013 2:50 am

Ok, I've been busy for the entire day to disable hilink on my linux pc, no luck!

http://192.168.1.1/html/switchProjectMode.html makes it a modem ....temporally, and there is no windows drivers for the modem so I cant communicate with the dam thing.

AT^U2DIAG=0

that code makes it a permanent modem, apparently


so does anyone know how I can make my Huawei E3131 work on mikrotik, nice speeds tho... but only works on PC, the modem was expensive tho, so I don't want to trash the dongle

Who is online

Users browsing this forum: jangins101 and 33 guests