Community discussions

MikroTik App
 
plisken
Forum Guru
Forum Guru
Topic Author
Posts: 2509
Joined: Sun May 15, 2011 12:24 am
Location: Belgium
Contact:

remove switch modus

Wed May 23, 2012 7:49 pm

How can i remove switch modus on rb 493AH
 
kirshteins
MikroTik Support
MikroTik Support
Posts: 592
Joined: Tue Dec 02, 2008 10:55 am

Re: remove switch modus

Thu May 24, 2012 9:30 am

What do you mean by "switch modus"? By default RB493AH ports are not switched.
 
User avatar
GuJack20
Trainer
Trainer
Posts: 345
Joined: Sat Jun 12, 2004 9:44 pm
Location: Tirana
Contact:

Re: remove switch modus

Thu May 24, 2012 1:17 pm

Maybe he is asking for the "switch chip".
No you can't remove it, but you can remove the switched ports from configuration through the winbox interface or CLI
 
plisken
Forum Guru
Forum Guru
Topic Author
Posts: 2509
Joined: Sun May 15, 2011 12:24 am
Location: Belgium
Contact:

Re: remove switch modus

Thu May 24, 2012 6:19 pm

Thanks for your answers.
sorry is the routerboard 493 Ah with gigabit ports
After reset the routerboard and remove basic configuration
see i that switch mode is enabled.
But i want routeren not switch.

Greatings
Plisken
 
User avatar
GuJack20
Trainer
Trainer
Posts: 345
Joined: Sat Jun 12, 2004 9:44 pm
Location: Tirana
Contact:

Re: remove switch modus

Thu May 24, 2012 10:38 pm

No, the 493 has 10/100mbit ports, the 493G instead has gigabit ports.

You can always reset the config with

/system reset-configuration


And if when the system boots show a mesage to remove config, just remove it, and the router will be clean as a baby :)
 
plisken
Forum Guru
Forum Guru
Topic Author
Posts: 2509
Joined: Sun May 15, 2011 12:24 am
Location: Belgium
Contact:

Re: remove switch modus

Fri May 25, 2012 6:13 am

i have done, system reset-configuration
the switch mode stay enabled

Tnx fot reply
 
kirshteins
MikroTik Support
MikroTik Support
Posts: 592
Joined: Tue Dec 02, 2008 10:55 am

Re: remove switch modus

Fri May 25, 2012 8:05 am

Switching mode is configured by setting master-port. If master is not set there is no switching.

Who is online

Users browsing this forum: GoogleOther [Bot] and 39 guests