I need help in configuring bandwidth controller on mikrotik. Following is my setup.
I have 20, 1mbps customers and total maximum bandwidth allowed at present is 3 Mbps between 20 customers.
My connection sharing ratio is 1:10
To share the speed equally between users i have following setup.
1 - USER AUTHENTICATES THROUGH PPPOE
2 - I CLASIFY THE TRAFFIC AND MARK THE PACKETS FOR THE TYPE OF BROADBAND CONNECTION
3 - I HAVE CREATED PCQ QUEUES FOR TYPE OF PLAN TO SHARE THE CONNECTION EQUALY BETWEEN USERS
4 - FINALLY I HAVE CREATED QUEUE TREE FOR UPLOAD and DOWNLOAD LIMITATIONS, WITH-LIMIT AT - 2Mbps AND MAX-LIMIT - 3Mbps
What I want to achieve is that each customer should not exceed 1 Mbps customer even though there is max of 3Mbps is available. Currently if there is only one user active then particular user will take all the available bandwidth (i.e. 3Mbps). This creates the problem for me as if there are more customers online then speed will be less and customers are complaining that they used to get 3Mbps and now its less. What i want to achieve is that each user should not exceed more than 1 Mbps speed even though more bandwidth is available.
Can anyone please point me to right direction?