My MikroTik RB2011UAS-2HnD-IN has been running for a while now, without any issues. Only the Wifi isn't really what I'd expect, so yesterday I installed my Airport Extreme again and turned off the wifi in the Mikrotik.
This normally should not be a problem?
Well, since then my Mikrotik is unavailable on the local network. It doesn't do DHCP anymore, no routing, all clients see the 192.168.88.1 as host down. It looks like the whole local interface side is down?
With a tethered iPhone to my Mac I can still access the IPSEC VPN. But I have never configured the Mikrotik to allow administrative access from that network.. So I cannot get in!
Also, I've got a separate VLAN for internet television and that still works flawlessly..
Also the Mac-Winbox tool cannot connect to the Mikrotik at all.
I've also tried using an USB-2-serial converter and a standard CISCO console cable to connect to the serial console. But still nothing happens. I cannot access the serial console.
I've also tried to do a reset of the Mikrotik (press and hold reset button while applying the power). But there is no change in the situation.. It looks like it doesn't do a factory reset and it just starts the current config.
So it's really as if the local 192.168.88.0/24 bridge is gone/not working?
Anybody have an Idea on how to fix this? I could really use the help