Community discussions

MikroTik App
 
junkie
just joined
Topic Author
Posts: 7
Joined: Thu Dec 03, 2009 8:47 pm

CCR1016-12G eth4 Running even if no cable connected

Wed Apr 17, 2013 12:24 pm

Maybe this is the right place to place this post ...

after some upgrades and downgrades from 6.06 to 6.13 the problem remains. The eth4 still remains in running.
I haven't found any other discussion about that, so if anyone already solved this problem, please explain me how to.

I had the same problem on CCR1036, but with a firmware upgrade, it seem be working fine.

thanks to anyone that will give me a starting point to solve this issue.
 
jandafields
Forum Guru
Forum Guru
Posts: 1514
Joined: Mon Sep 19, 2005 6:12 pm

Re: CCR1016-12G eth4 Running even if no cable connected

Mon Apr 29, 2013 7:10 am

Maybe this is the right place to place this post ...

after some upgrades and downgrades from 6.06 to 6.13 the problem remains. The eth4 still remains in running.
I haven't found any other discussion about that, so if anyone already solved this problem, please explain me how to.

I had the same problem on CCR1036, but with a firmware upgrade, it seem be working fine.

thanks to anyone that will give me a starting point to solve this issue.
/interface ethernet set 0 disable-running-check=no

Who is online

Users browsing this forum: No registered users and 32 guests