Community discussions

MUM Europe 2020
 
lorenzesz
newbie
Topic Author
Posts: 39
Joined: Sat Nov 12, 2011 4:24 pm

Routerboard 2011 + 4 x 912 + SXT

Wed Jul 03, 2013 3:25 pm

Hi,

i am starting a WISP business. I have all stuff i need, but now i need to setup the network.

How can I setup the router to count the traffic of each CPE and limit after x GB to x kbps?

How can I make use of WMM QoS over air? I would like to make 3 classes: LAN, WAN and http.

Can someone point me out how to make it?
 
lorenzesz
newbie
Topic Author
Posts: 39
Joined: Sat Nov 12, 2011 4:24 pm

Re: Routerboard 2011 + 4 x 912 + SXT

Thu Jul 11, 2013 9:00 pm

> Tried to set IP on ether1 to 83.238.23.37 and set gateway for
> 0.0.0.0/0 to
> 83.238.23.38 but I get PING timeouts. Or when I set the IP on ether1
> to
> 83.238.23.38 and the gateway to 83.238.23.37 No route to host on PING.
>

Please make sure you have specified subnet mask during IP address configuration,
83.238.23.37/30

otherwise if this does not work, you should contact your ISP and confirm that they gave your correct IP address.


> Second what I need to do is to set QoS WMM on the AP. Is it better to mark
> the packets on AP or on the 2011? And how can I do this. I want four
> classes. LAN, WAN, HTTP, UDP (limited to 16 kbps). Please give me clue.
>

/ip firewall mangle allows you to mark LAN/WAN/HTTP/UDP traffic and supports
further QoS configuration.

> _____
>
> Third what I need to setup is to limit the transfer rate to x kbps per CPE
> (SXT Lite) after x GB per month.
>

It is possible with HotSpot server.
http://wiki.mikrotik.com/wiki/Hotspot

Regards,
Sergejs



> Hi,
>
>
>
> I have a fiber connection and got one 2011, four 912, three SXT Lite. I plan
> to buy 50 more SXT Lite, but I need help getting the network running. I am
> new to RouterOS.
>
>
>
> I need to setup the 2011 to get Internet access. I got from my ISP this:
>
> PTP 83.238.23.36/30
>
> Router .38
>
>
>
> LAN 37.128.115.136/29
>
> Router .137
>
>
>
> Tried to set IP on ether1 to 83.238.23.37 and set gateway for 0.0.0.0/0 to
> 83.238.23.38 but I get PING timeouts. Or when I set the IP on ether1 to
> 83.238.23.38 and the gateway to 83.238.23.37 No route to host on PING.
>
> _____
>
> Second what I need to do is to set QoS WMM on the AP. Is it better to mark
> the packets on AP or on the 2011? And how can I do this. I want four
> classes. LAN, WAN, HTTP, UDP (limited to 16 kbps). Please give me clue.
>
> _____
>
> Third what I need to setup is to limit the transfer rate to x kbps per CPE
> (SXT Lite) after x GB per month.
>
>
>
> Please help.

>
>
>
>
 
lorenzesz
newbie
Topic Author
Posts: 39
Joined: Sat Nov 12, 2011 4:24 pm

Re: Routerboard 2011 + 4 x 912 + SXT

Thu Jul 11, 2013 9:05 pm

Hello,

Scripts should be used, if only local HotSpot server is used.
Process could be automated by scripts, that are running on RADIUS server.

Regards,
Sergejs



> I have it almost running. In Hotspot Server under User. I can limit Total Bytes.
> Under User Profile I can limit the Rate.
>
> But how can I throttle the bandwidth after X Gbyte per month?

Who is online

Users browsing this forum: MSN [Bot] and 58 guests