Community discussions

MUM Europe 2020
 
squash0111
just joined
Topic Author
Posts: 1
Joined: Thu Sep 19, 2013 6:50 pm

Please Help! Queues

Thu Sep 19, 2013 7:10 pm

I have a CCR 12G-4S with v6.4. I'd like to set this up in a large apartment complex to provide Internet service. I'd like to have all users get the same bandwidth, say 15M/15M each. But, if their traffic is going to something on my network (NOT going to the Internet), give them unlimited bandwidth?

For example:
User 1-100 traffic to Internet - Each get 15Mbps
User 5, 9, 15, 47 - traffic to my email server - unlimited
User 40, 69 - traffic to my website - unlimited

I've tried setting up the above scenario, and i've been able to get the PCQ bandwidth share to work. However, I'm having trouble adding the unlimited bandwidth. I'm marking packets like this:

10.0.0.0/24 - local_traffic
ethe3 - customer_upload
ethe2 - customer_download

But it appears that even 10.0.0.0/24 traffic is matching both local_traffic and customer_download rules.
 
Amirkhatam
just joined
Posts: 18
Joined: Wed Mar 06, 2013 11:33 pm
Contact:

Re: Please Help! Queues

Sat Sep 21, 2013 3:25 pm

you have to add some rule first for
User 5, 9, 15, 47 - traffic to my email server - unlimited
User 40, 69 - traffic to my website - unlimited
after that a rule for all of your user , i means 1-100 !
Every Thing Possible With MikroTik
 
deejayq
Member Candidate
Member Candidate
Posts: 195
Joined: Wed Feb 23, 2011 8:33 am

Re: Please Help! Queues

Sun Sep 22, 2013 11:00 pm

make sure you don't have pass-through set to yes in your packet marking rules.

Who is online

Users browsing this forum: CZFan, negr0 and 70 guests