Community discussions

MUM Europe 2020
 
bhunter
just joined
Topic Author
Posts: 1
Joined: Tue Oct 15, 2013 7:40 pm

RB750GL plex firewall rules

Tue Oct 15, 2013 7:53 pm

I am very new to configuring a mikrotik firewall. I have successfully chages its lan ip and dhcp pool. I run a plex server on my lan. Plex requires tcp port 32400 9myplex) and tcp 5353 (ios device).

So I created nat rules to connect. I successfully connected utilizing myplex. The issue I am having is that when I attempt to start a movie it just states loading. I am thinking there is an outbound issue.

This is how I setup the nat rule

chain=dstnat

dst port=32400

In interface= ether1 gateway (stock config)

action= dst-nat
to address=192.168.*.* (my plex server)
to ports=32400

Do I need to add another rule in order for plex to function properly. I had this functioning properly in my old router so I know my plex server streams fine.

Thanks for any help
 
deejayq
Member Candidate
Member Candidate
Posts: 195
Joined: Wed Feb 23, 2011 8:33 am

Re: RB750GL plex firewall rules

Fri Oct 18, 2013 12:03 pm

post a diagram of how the devices are connected (including the ports they're plugged in)

Who is online

Users browsing this forum: No registered users and 34 guests