Community discussions

 
tolax
just joined
Topic Author
Posts: 20
Joined: Thu Dec 06, 2012 10:48 am

Cannot Reset the password of the unit RB800

Wed Nov 06, 2013 3:40 pm

Hello,

I have RB800 which i cannot access now using WinBox it shows wrong user/password and i already done do a RESET but still the problem occur, is anybody can help me how to solve this problem?

Thanks
 
User avatar
rickfrey
Trainer
Trainer
Posts: 610
Joined: Sun Feb 14, 2010 11:41 pm
Location: Van, Texas
Contact:

Re: Cannot Reset the password of the unit RB800

Thu Nov 14, 2013 7:02 am

http://wiki.mikrotik.com/wiki/Manual:Ro ... _Passwords

How can I recover a lost password?
If you have forgotten the password, there is no recovery for it. You have to reinstall the router.

http://wiki.mikrotik.com/wiki/Manual:Netinstall
Launch your company forward with professional training!
http://rickfreyconsulting.com/product-c ... raining-2/
 
AaronG
just joined
Posts: 3
Joined: Fri Nov 15, 2013 1:16 am

Re: Cannot Reset the password of the unit RB800

Fri Nov 15, 2013 1:36 am

Image

Assuming you are looking at the board and the PCI slots are the top, see the upper-right mounting hole? See that little split-circular thing just below it? That's the hardware reset jumper.

1. Take a decently large phillips screwdriver and rest it in the center of the split-circular thing.
2. Power on the router, leaving the screw driver in place.
3. Wait for the double-beep, then try to log in (once you hear the double-beep, you can remove the screwdriver jumper)

You won't retain the configuration, but you can now log in using the default IP/username.

Who is online

Users browsing this forum: No registered users and 21 guests