Community discussions

 
aaronhinds
just joined
Topic Author
Posts: 1
Joined: Thu Mar 06, 2014 1:28 am

RB2011 Setup Help

Thu Mar 06, 2014 1:40 am

Hey guys, have spent countless hours trying to figure this one out but anyway here goes my setup is

ISP> /29 subnetted public addresses > RB2011 > Ubiquiti PtP radio link , Managed switch > Ubiquiti ptp radio Link, Managed switch (LAN of about 10 Pcs Connected here) then continues onto another ptp link and another group of computers, also connected to first managed switch is another sector radio link with computers connected.

as you can see have built myself quite a network but am trying to manage the addresses efficiently at the moment all devices are on the same big subnet 10.0.0.0/8 and as one could imagine its quite messy

have been trying to setup a VLAN trunk from the RB2011 and then split out the respective vlans at the managed switches, and also have a managment vlan for the radio link gear.
basically putting multiple vlans on say ether5 each with their own dhcp server and then splitting them out where needed
have listed below what subnets should work then all i should have to do is set the switch accordingly.
have added all the vlans into the RB2011 but dont fully understand how i should have the "bridge" setup etc just cannot seam to get it to go

any help would be greatly appreciated


255.255.255.128
10.0.0.0 10.0.0.1 10.0.0.126 10.0.0.127
10.0.0.128 10.0.0.129 10.0.0.254 10.0.0.255
10.0.1.0 10.0.1.1 10.0.1.126 10.0.1.127
10.0.1.128 10.0.1.129 10.0.1.254 10.0.1.255
10.0.2.0 10.0.2.1 10.0.2.126 10.0.2.127
10.0.2.128 10.0.2.129 10.0.2.254 10.0.2.255
10.0.3.0 10.0.3.1 10.0.3.126 10.0.3.127
10.0.3.128 10.0.3.129 10.0.3.254 10.0.3.255
10.0.4.0 10.0.4.1 10.0.4.126 10.0.4.127
10.0.4.128 10.0.4.129 10.0.4.254 10.0.4.255
10.0.5.0 10.0.5.1 10.0.5.126 10.0.5.127
 
User avatar
NAB
Trainer
Trainer
Posts: 503
Joined: Tue Feb 10, 2009 4:08 pm
Location: UK
Contact:

Re: RB2011 Setup Help

Thu Mar 06, 2014 11:52 am

my setup is
Sorry. That's way too confusing. I am afraid that I have no idea what you are trying to achieve. Perhaps you could provide a network diagram?
Nicholas Barnes BSc(hons)
Certified Mikrotik Consultant
Certified Mikrotik Trainer

Vitell - Asterisk, Linux and network consultants
Unofficial IRC channel: #routerboard on irc.z.je
 
efaden
Forum Guru
Forum Guru
Posts: 1711
Joined: Sat Mar 30, 2013 1:55 am
Location: New York, USA

Re: RB2011 Setup Help

Thu Mar 06, 2014 1:30 pm

my setup is
Sorry. That's way too confusing. I am afraid that I have no idea what you are trying to achieve. Perhaps you could provide a network diagram?
+1

Sent from my SCH-I545 using Tapatalk

Who is online

Users browsing this forum: No registered users and 17 guests