Good Day everyone
I'm in need of assistance and believe this is the place to get it.
Upfront I will confess, I know nothing of the task I'm given, but hope to learn and add to my knowledge. I've been around IT and networks for 19 years, built Wifi systems and Server rooms but routing and gateways was always supplied configured and the closest I got to internet connections was the Gateway IP given by ISP's, so this is very new to me.
The Hotel I work for has an existing wifi backbone infrastructure consisting of 91 x Picostation M2 AP's that splits from 6 x D-link Websmart switches. Currently it feeds to a router provided by a 3rd party which is very troublesome and results in numerous complaints. So I was tasked to take the provided RB1100AHx2 and replace the 3rd party unit.
What is available to me
Routerboard RB1100AHx2 with RouterOS 5.26
30Mb Fibre connection, Internet Access will be on this connection and for purpose of discussion IP range A.A.A.A and therefore gateway of A.A.A.225
Public IP on range A.A.A.A, for purpose of discussion IP A.A.A.230
4Mb ADSL connnection, will be used to handle all SMTP traffic as the connection mentioned above does not allow SMTP traffic, for purpose of discussion IP Range B.B.B.B Gate way B.B.B.3
This is what I need to do.
1. Configure this unit to relay all traffic from the backbone Wifi system onto the Internet through gateway A.A.A.225
2. Configure a port to relay all smtp traffic over gateway B.B.B.3
3. Configure a port with public IP address A.A.A.230 to allow remote access
4. Disable viewing of illicit websites
5. Restrict P2P downloads
In short, This unit will be placed between the Gateway and Backbone to allow any user connected to it uncapped internet access, but control what that user is allowed to see and download.
Any assistance will be greatly appreciated even if I am only pointed on the direction of material that explains how this can be done, any other suggestions is welcome.
Thanking you in advance