Community discussions

MikroTik App
 
Redman
just joined
Topic Author
Posts: 18
Joined: Mon Jun 16, 2014 3:59 pm

NAT Filter

Thu Jun 19, 2014 4:57 pm

Hello,

I just create a NAT for MSTSC connection, It is works but I want to permit only for 1 IP, Where is the settings for it.
Can somebody help me?

Thanks. (CCR1009)
 
User avatar
jayd2k
newbie
Posts: 45
Joined: Tue Sep 10, 2013 6:46 am
Location: Philippines

Re: NAT Filter

Thu Aug 07, 2014 9:17 am

This thread is pretty old already - if the problem still exists, perhaps you could post your config?
By 2016 total internet traffic will be 3x 2011
 
Redman
just joined
Topic Author
Posts: 18
Joined: Mon Jun 16, 2014 3:59 pm

Re: NAT Filter

Thu Sep 11, 2014 11:30 am

It doesn't work yet, I postponed this problem.
Maybe I comeback later with this...
 
User avatar
cdiedrich
Forum Veteran
Forum Veteran
Posts: 952
Joined: Thu Feb 13, 2014 2:03 pm
Location: Basel, Switzerland // Bremen, Germany
Contact:

Re: NAT Filter

Thu Sep 11, 2014 1:12 pm

add the desired IP to the src-address of your dst-nat rule.

-Chris
Christopher Diedrich
MTCNA, MTCUME, MTCWE
Basel, Switzerland
Bremen, Germany

There are 10 types of people: Those who understand binary and those who don't.
There are two types of people: Those who can extrapolate from incomplete data
 
Redman
just joined
Topic Author
Posts: 18
Joined: Mon Jun 16, 2014 3:59 pm

Re: NAT Filter

Fri Sep 19, 2014 3:42 pm

It is working now but i'm not sure if this is the best way,

;;;RDP_MIT
chain=dstnat action=netmap to-adress=102.168.2.50 to-ports=3389 protocol=tcp dst-adress=172.10.10.10 dst-port=3333 log=no log-prefix""

Who is online

Users browsing this forum: Sigma and 43 guests