MikroTik

Hi all,

I have Mikrotik RB750, what i want to do is to set up the router from the bignning.

1) set the address in Ip->Address to WAN port 192.168.1.0/24
2) ether2 -> set as master port
3)ether3 -> slave
4)ether4-> slave
5)ether5 -> slave

6) Ip-> pool -> 192.168.2.0/24
7) Ip-> dhcp server -> set the pool and ether2-master
Ip->dhcp server -> tab networks -> address 192.168.1.0/24 -> gateway 192.168.1.1 -> DNS 192.168.1.1

PROBLEM:

DHCP server get red and no computer gets IP!!

Please guys help me...

Hi all,

I solve my problem yesterday. Thanks for the tips rextended.



In interface i was putting the wrong interface. The correct interface is ether2-master.

Thanks!

Hi,

how did you solved the issue ? Can write some clues ?

Best Regards

Interface must have ip address in the range handled by the DHCP server

Interface must have ip address in the range handled by the DHCP server

Exactly!!! That was part my mistake...

Hi all,

thanks i forgot to put the address on the interface. This solved me the first issue that i face it.
The second issue that still "colored red the secondary DHCP configuration" was because i forgot to remove the virtual interface from the bridge that already was part from primary DHCP configuration.

Anyway all you help was for me the success of my configuration .

Best Regards to all !