Community discussions

MUM Europe 2020
 
mazvone
just joined
Topic Author
Posts: 4
Joined: Mon Sep 08, 2014 3:04 pm

Recomendation for outdoor acess point

Sat Sep 13, 2014 12:00 pm

Hello, i need recomendation for Mikrotik outdoor acess point 2,4 GHZ for 5 floor building with width of 60 meters. Mikrotik hardware would be installed 20 meters from building. Which hardware would you recomend?
 
plisken
Forum Guru
Forum Guru
Posts: 2433
Joined: Sun May 15, 2011 12:24 am
Location: Belgium
Contact:

Re: Recomendation for outdoor acess point

Sat Sep 13, 2014 12:29 pm

Will you cover the whole building with 1 accesspoint?
 
User avatar
ohara
Member
Member
Posts: 371
Joined: Mon Jun 13, 2011 11:30 pm
Location: Warsaw

Re: Recomendation for outdoor acess point

Sun Sep 14, 2014 12:21 am

1. use a 90 degree sector antenna with high vertical beamwidth and any routerboard
2. use a omni antenna with high vertical beamwidth and any routerboard
2. alternatively use TL-WA7210N as it has 30 degree vertical beamwidth

In each scenario the outcome will be very weak. Laptops and tablets will eventually connect at 6.5Mbps to 11.0Mbps.

As Plisken mentioned - you need to explain your requirements in more detail to get better recommendation.
You do not have the required permissions to view the files attached to this post.
 
mazvone
just joined
Topic Author
Posts: 4
Joined: Mon Sep 08, 2014 3:04 pm

Re: Recomendation for outdoor acess point

Sun Sep 14, 2014 12:57 pm

Thank you for reply !
If it's possible i will try with one acess point or one acess point and one repeater.
I try with TL-WA7210N but i have signal only to the 3rd floor.
Image
 
mazvone
just joined
Topic Author
Posts: 4
Joined: Mon Sep 08, 2014 3:04 pm

Re: Recomendation for outdoor acess point

Sun Sep 14, 2014 1:04 pm

Can i resolve this with two RouterBOARD 2.4Ghz SXTG-2HnD (RouterOS L4), one as acess point one as repeater?
 
plisken
Forum Guru
Forum Guru
Posts: 2433
Joined: Sun May 15, 2011 12:24 am
Location: Belgium
Contact:

Re: Recomendation for outdoor acess point

Sun Sep 14, 2014 1:18 pm

Repeater mode = halve speed.

Set two or three accesspoints on a high pilon

But connect this with network cable.

Who is online

Users browsing this forum: No registered users and 19 guests