Tue Oct 07, 2014 5:15 pm
This shouldn't be too hard. Basically you want a firewall rule to block traffic from a certain MAC address, but only during certain times.
Create a new firewall rule
TAB General:
Dst Address: 0.0.0.0
TAB Advanced:
Src. MAC Address: 00:00:00:00:00:00 <-- MAC address of client!
TAB Extra:
Time: Your desired period and days
TAB Action:
Choose Block or Drop and if you wish to have it logged or not
This will block all traffic going outside the clients subnet (through the gateway). If you have multiple subnets, it will also block that!
Doing this per IP would be a lot easier because then your could use an address list and use 1 rule to block multiple computers. If that is not possible you will need to create a firewall rule per MAC address as described above. It will probably generate a bit of extra load.
Let us know if it works!