Community discussions

MikroTik App
 
gdclarke
just joined
Topic Author
Posts: 8
Joined: Wed Aug 27, 2014 4:39 pm

RB750UP - Change default IP

Tue Oct 21, 2014 10:55 pm

Hi - I'm new to MikroTik products and have limited network admin experience. I'm hoping my question is easy to answer ...

I have a RB750UP as part of a closed wired & wireless network - there's no outside Internet (today).

Using the factory default settings I have the following:
+ eth2/Port2 server w/ fixed IP 192.168.88.2
+ eth3/Port3 UBNT RocketM2 as AP - IP 192.168.88.3 / gateway 192.168.88.1

This mostly works the way I want.

The RB750UP is replacing an existing router and switch. The router uses IP 192.168.2.1 and serves DHCP 192.168.2.100-192.168.2.254.

How do I update the RB750UP config from the default 192.168.88.1 to 192.168.2.1 so that the equipment swap is seamless?

Thanks in advance for your time.

Graham
 
User avatar
lcm
Trainer
Trainer
Posts: 57
Joined: Wed Apr 28, 2010 11:56 pm
Location: Brazil
Contact:

Re: RB750UP - Change default IP

Wed Oct 22, 2014 12:34 am

i think you should change the following configurations:

-ip / address
-ip / Dhcp Server / Networks info
-ip / pool
-ip / routes if you have static routes
-ip / firewall rules if you have
 
User avatar
heislerb
Frequent Visitor
Frequent Visitor
Posts: 56
Joined: Mon Sep 16, 2013 4:41 pm

Re: RB750UP - Change default IP

Wed Oct 22, 2014 1:04 am

 
gdclarke
just joined
Topic Author
Posts: 8
Joined: Wed Aug 27, 2014 4:39 pm

Re: RB750UP - Change default IP

Fri Nov 07, 2014 7:06 pm

this turned out to be very easy using WebFig v6.15

Quick Set ->
- IP Address [set to whatever you want]
- DHCP Server Range [update to match new IP]
-> APPLY
-> Reboot

Done

Who is online

Users browsing this forum: syslog and 45 guests