I got a Netbox5 (911G-5HPacD) link. Distance is 34 km using 30 dbi dishes.
Signal -63 and signal to noise 48 dB running 6.21.1
I am a newbie with 802.11n and want advice what settings I must use for a fast and stable link. If possible the link must be +40mps duplex.
My client side: ( I had to disable for now it because of various reasons)
set [ find default-name=wlan1 ] band=5ghz-onlyn basic-rates-a/g=""
channel-width=20/40mhz-Ce country=brazil frequency=5900 frequen
ap-bridge nv2-cell-radius=40 radio-name=CGDville2Pberg911AC rat
configured rx-chains=0,1 scan-list=5000-5500 ssid=CGD2PbergAC \
supported-rates-a/g="" tdma-period-size=auto tx-chains=0,1 \
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
If I use the same settings on the AP ( except of course for the mode, which is in AP-bridge) I get a link but is very unstable. Running up to 70-80 mbps and even dropping to 3 mbps.
How can I make it fast and stable?