I have a problem routing between two networks on my RB1100 that I can't figure out.
On my RB1100 I have a 192.168.1.0/24 network and hosts.
I also have, separately, a device (an IP phone controller) which runs a DHCP server for the IP phones on the 192.168.42.0/24 network. Its web management is accessible from this network at http://192.168.42.1.
I would like to connect the IP phone controller to a port on the RB1100 such that I can access its UI at http://192.168.42.1 from any host on the 192.168.1.0/24 network.
To do this, I freed up a port from the RB1100's bridged port, and added a dhcp-client to it. It gets an address:
And a route is dynamically added:
9 D 192.168.42.86/24 192.168.42.0 ether1-phone-controller
And I can ping it from the RB1100:
29 ADC 192.168.42.0/24 192.168.42.86 ether1-phone-controller 0
..But, I cannot reach 192.168.42.1 from any 192.168.1.0/24 host.
[admin@RB1100] > ping 192.168.42.1 HOST SIZE TTL TIME STATUS 192.168.42.1 56 99 0ms
Any idea what I am doing wrong here?