Community discussions

MikroTik App
 
bingo220
Member Candidate
Member Candidate
Topic Author
Posts: 124
Joined: Sun Sep 22, 2013 9:30 pm
Location: Ukraine

RB "CCR1016-12g" and UPS "APC Back-Ups RS550VA LCD"

Fri Apr 24, 2015 1:47 pm

Hi All!
There is a need to monitor the state of the power supply (220V).
I plugged usb-cable from UPS to RB.
Also to this UPS are connected cameras, switches etc.
I made setup and now I can control some UPS parameters.
But have problem.
I don't know what arguments I need to write to Winbox>System>UPS:
1. Off Line Time (can be "HH:MM:SS")
2. Min Run Time (can be "HH:MM:SS" or "never")
I don't want the router goes into hibernation mode never.
Router should work in any state of the UPS until the battery is completely drained.
i have read the wiki but understood nothing.
So the question is:
What arguments I have to write to:
Off Line Time - ?
Min Run Time -?
 
InoX
Forum Guru
Forum Guru
Posts: 1966
Joined: Tue Jan 09, 2007 6:44 pm

Re: RB "CCR1016-12g" and UPS "APC Back-Ups RS550VA LCD"

Fri Apr 24, 2015 4:57 pm

Off Line Time 00:00:00
Min Run Time never
 
bingo220
Member Candidate
Member Candidate
Topic Author
Posts: 124
Joined: Sun Sep 22, 2013 9:30 pm
Location: Ukraine

Re: RB "CCR1016-12g" and UPS "APC Back-Ups RS550VA LCD"

Fri Apr 24, 2015 6:40 pm

InoX, thank you for the reply.
I have some doubts. Wikipedia says:
offline-time >
0 - the router will go into hibernate mode according the min-runtime setting and 10% of battery power event. 
In this case, the router will wait until the UPS reports that the battery power is below 10%
If I understood right my router will use hibernation mode when battery charging will be 10%.
Or "00:00:00" and "0" are different things?

Who is online

Users browsing this forum: Bing [Bot], cddaraa, svh79 and 18 guests