PIM problem

armageddoner666 · Thu Feb 16, 2017 10:29 am

Good day. There are two uplink with IPTV from different ISP. I trying to set up PIM. And when I up PIM-interface, the router subscribes to all available multicast groups and, as a result, corrupts the channel. Should it work this way, or there is a bug in the implementation of the protocol? Or may be it is mistake in configuration? Thanks.

scotthammersley · Wed Feb 22, 2017 5:20 pm

Can you post the pertinent configuration for review? There are a number of possibilities that could be causing your issue.

Thanks,

armageddoner666 · Mon Feb 27, 2017 8:04 am

 > routing pim interface print 
Flags: X - disabled, I - inactive, D - dynamic, R - designated-router, v1 - IGMPv1, v2 - IGMPv2, v3 - IGMPv3 
 #      INTERFACE                                                                                            PROTOCOLS                                                                                           
 0   v3 IPTV-NSK                                                                                             igmp                                                                                                
 1   v3 IPTV-SS                                                                                              igmp                                                                                                
 2   v3 bridge                                                                                               igmp

> routing pim rp print 
Flags: D - dynamic, X - disabled 
 #    ADDRESS         TYPE        PRIORITY
 0    192.168.88.1                     192

PIM problem

PIM problem

Re: PIM problem

Re: PIM problem

Who is online