Hi everyone!

When I have static routes registered in my router, and I enabled the option "Redistribute Static Routes" in the instance of OSPFv3, and try to summarize them in the "Area Ranges" of Mikrotik, the summarization does not work.

/routing ospf-v3 area
add area-id=0.0.0.2 name=area2
/routing ospf-v3 instance
set [ find default=yes ] redistribute-static=as-type-1 router-id=10.0.2.1
/routing ospf-v3 area range
add area=area2 range=2001:db8::20/124
add area=area2 range=2001:db8:210::/45

/ipv6 route
add dst-address=2001:db8:214::/64 gateway=ether3
add dst-address=2001:db8:215::/64 gateway=ether3
add dst-address=2001:db8:216::/64 gateway=ether3

Another router im my network:

# DST-ADDRESS GATEWAY DISTANCE
12 ADo 2001:db8:210::/45 fe80::d6ca:6dff:fe53:... 110
13 ADo 2001:db8:214::/64 fe80::d6ca:6dff:fe53:... 110
14 ADo 2001:db8:215::/64 fe80::d6ca:6dff:fe53:... 110
15 ADo 2001:db8:216::/64 fe80::d6ca:6dff:fe53:... 110

What RouterOS version is this? Have you tried any others?

Hi,

Maris answer me by email:

Hello,

These are assigned IPV6 prefixes for the client. Such routes are always static even in ipv4. You do not see ipv6 connected route because there isn't one. In ipv4 connected route is because ipv4 has assigned /32 address on interface.

Best regards,
Maris

--
MikroTik.com

viewtopic.php?f=14&t=121236#p596074

Covering the duplicate posting.