hello
please give some recommendations

i setup a bgp connection on my new 1009 ccr
upstream isp give me a full view table

i'm trying to ping some ip's and its give me - no route to host
in route list i dont see this network at all, only 1-3 ip's from it
like 46.38.xx.54

what could be an issue ?

Contact your ISP why they are advertising /32 prefix instead of /24. As far as I know /24 is the minimum that should appear in global tables.

so base on screens, my configuration is correct ?
its from upstream ?

Try on your bgp router.
May be your ISP, for some reasons, dont have prefixes you are looking for.
All prefix lengths are legit on Full View, but most ISPs drop longer then 24.

Try

Code: Select all

 /ip route print where "address_you_ping_here" in dst-address

on your bgp router.
May be your ISP, for some reasons, dont have prefixes you are looking for.
All prefix lengths are legit on Full View, but most ISPs drop longer then 24.

no entries for this address at all ((

So, this is a question for your ISP provider.
46.38.56.0/21 is perfectly visible on internet.
https://stat.ripe.net/46.38.56.0%2F21#tabId=at-a-glance

So, this is a question for your ISP provider.
46.38.56.0/21 is perfectly visible on internet.
https://stat.ripe.net/46.38.56.0%2F21#tabId=at-a-glance

sorry, long reply from command line

[admin@Core0] > ip route print where "46.38.56.76" in dst-address
Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 A S 0.0.0.0/0 combo1 1
1 S 0.0.0.0/0 combo1 1