Community discussions

MikroTik App
 
User avatar
nichky
Long time Member
Long time Member
Topic Author
Posts: 634
Joined: Tue Jun 23, 2015 2:35 pm

TE- Failover Testing

Thu Mar 08, 2018 10:42 am

Using this example:

https://wiki.mikrotik.com/wiki/Manual:Simple_TE

About Failover Testing, MikroTik already says:

"Note: Switching from primary to secondary path may not be as fast as expected. It depends on OSPF dead timeouts, routing table updates and timeout settings in TE tunnel configuration."

Just i need your experiance how long does it take? in my case it takes 2 min :)

Thanks
You do not have the required permissions to view the files attached to this post.
RouterOS does not have a random function. Many has tried to make script to make random text, but all seems to be flawed.
viewtopic.php?f=9&t=160183

!) Safe Mode is your friend;
 
Vooray
Frequent Visitor
Frequent Visitor
Posts: 72
Joined: Mon Feb 23, 2015 3:34 pm

Re: TE- Failover Testing

Thu Mar 08, 2018 5:32 pm

2 mins is realy alot.
Can you add bfd to your setup and share results?
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 6130
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: TE- Failover Testing

Thu Mar 08, 2018 5:42 pm

By enabling BFD or reducing OSPF dead interval

and

setting lower TE reoptimize interval and primary-retry-interval
 
User avatar
nichky
Long time Member
Long time Member
Topic Author
Posts: 634
Joined: Tue Jun 23, 2015 2:35 pm

Re: TE- Failover Testing

Thu Mar 08, 2018 9:41 pm

By enabling BFD or reducing OSPF dead interval

and

setting lower TE reoptimize interval and primary-retry-interval
@mzar

I've done that,normally how long do i need to expect,approximal?
RouterOS does not have a random function. Many has tried to make script to make random text, but all seems to be flawed.
viewtopic.php?f=9&t=160183

!) Safe Mode is your friend;

Who is online

Users browsing this forum: No registered users and 22 guests