Hi I am trying to add a saisei traffic manager to our wisp network and would like some help with the config on the CCR edge router please. The saisei box has an internal and external interface connected to 2 ports on our CCR edge router. I am trying to setup 2 vlans from each tower site, 1 vlan will pass through the saisei box and 1 vlan will be a direct path to the external gateway if Saisei fails. I have set a higher ospf cost for the direct path. I currently don't have the saisei box in line but have a cable between eth4-eth5 and once i get traffic passing through these ports i will add the saisei box. Please can anyone advise if my diagram looks wrong..