How to filter 10.10.10.0/24 on R3 towards R2 ?
It doesn't work
Code: Select all
/routing filter
add action=accept chain=ospf-out prefix=10.10.30.0/24
add action=discard chain=ospf-out
On R2 filter ospf_in working, but I will not do.
OSPF filter - need help
Hello
How to filter 10.10.10.0/24 on R3 towards R2 ?
It doesn't work
On R2 filter ospf_in working, but I will not do.
How to filter 10.10.10.0/24 on R3 towards R2 ?
It doesn't work
On R2 filter ospf_in working, but I will not do.
You do not have the required permissions to view the files attached to this post.
Re: OSPF filter - need help
Theoretical.
If you dont need this route at R2 you should filter it in inbound filter on R2 _and_ this route has to be external.
If you dont need this route at R2 you should filter it in inbound filter on R2 _and_ this route has to be external.
Re: OSPF filter - need help
That means that this route needs to be originated by an ABR (Area Border Router) or an ASBR (Autonomous System Border Router).Theoretical.
If you dont need this route at R2 you should filter it in inbound filter on R2 _and_ this route has to be external.
Who is online
Users browsing this forum: No registered users and 17 guests