RouterOS 6.40.8 does not support Totally NSSA areas?
Posted: Fri Nov 02, 2018 11:03 am
Hello, I configured an ABR as following:
R1:
/routing ospf area
add area-id=0.0.0.1 inject-summary-lsas=no name=area1 type=nssa
Inter-area routes are now suppressed by R1, however I am still seeing AS external routes in area1 injected by R1. How do I configure a totally nssa area where both Type3 and Type5 are suppressed and only the default route is advertised by the ABR?
R1:
/routing ospf area
add area-id=0.0.0.1 inject-summary-lsas=no name=area1 type=nssa
Inter-area routes are now suppressed by R1, however I am still seeing AS external routes in area1 injected by R1. How do I configure a totally nssa area where both Type3 and Type5 are suppressed and only the default route is advertised by the ABR?