I've just seen some routes are in wrong order in routing table. I've made some change in bgp peers setting and filters to correct order of all my egress traffic, but some routes are still wrong.
For example I've set filters as described bellow:
Code: Select all
add action=accept chain=RETN_in protocol=bgp set-bgp-local-pref=200 set-bgp-weight=40
add action=accept chain=Severen_in protocol=bgp set-bgp-local-pref=100 set-bgp-weight=20
I can see in routing table: some routes are ok, but some are wrong. Take a looking for a picture. My question is: Is (was) it a bug in mikrotik, or have I done something wrong? Thank you.
Code: Select all
routerboard: yes
model: CCR1009-7G-1C-1S+
firmware-type: tilegx
factory-firmware: 3.41
current-firmware: 6.41.3
upgrade-firmware: 6.41.3