I thought a little bit how to leave the customers we have today without needing physical changes, but at the same time improving the network.
I then made an OSPF + MPLS routing between 3 mikrotik routers.
Running bandwidth testing between R3 and R1 or vice versa through the VPLS tunel interface everything works normally.
Code: Select all
R1 OSPF, MPLS and VPLS R1 (pppoe-server in bridge vpls tunel with R3) R1 loopback = 10.1.1.1/32 R1 ether2 = 10.0.0.1/30 R2 - OSPF, MPLS ok R2 loopback = 10.1.1.2/32 R2 ether1 = 10.0.0.2 / 30 R2 ether2 = 10.0.0.5/30 R3 loopback = 10.1.1.3/32 R3 ether1 = 10.0.0.6/30 R3 - bridge VPLS tunel and ehter2
If you add a pppoe-client to R3 and use the Bridge interface (vlps + ether2) it authenticates to R1 and everything is OK.
If you connect another Mikrotik on ether2 (tunel vpls + ether2) from R3 the router ping the interface (ether1 mac ) of R1 but does not authenticate.
Could you give me some help on this?