hi

I want to forward IP from the IP range 10.0.3.0 to access this IP range 192.168.21.0 with different VLAN

please provide the way using the router UI not terminal

note: both of them are on the same local network

thank you

So both networks are attached to the same router?
If so and the config is default-ish, it should automatically route between the networks without any user action required.
Your question was a bit ambigious, either a language barrier or typo - or not precisely put. I read your "won't" as "want"
In case your statement "won't" means "do not want to", you'll need to block this in the firewall filter chain:
-Chris

Hi sir Chris,

How about if like in my case. I Have multiple separated VLAN such as:
vlan 10 - Admin network (offices, workstation,servers and network equipment)
vlan 40 - Dormitory WIFI
vlan 99 - Guest WIFI

How could i access internal IP's within vlan10 from vlan40? Incase that i'm in dormitory and i want to access database server from vlan10 while
currently connected to dormitory's wifi(vlan 40)?

TIA! sir.

So both networks are attached to the same router?
If so and the config is default-ish, it should automatically route between the networks without any user action required.
Your question was a bit ambigious, either a language barrier or typo - or not precisely put. I read your "won't" as "want"
In case your statement "won't" means "do not want to", you'll need to block this in the firewall filter chain:

Code: Select all

/ip firewall filter
add action=drop chain=forward src-address=10.0.3.0/24 dst=address=192.168.21.0/24
add action=drop chain=forward src-address=192.168.21.0/24 dst=address=10.0.3.0/24
###adjust your network sizes accordingly if necessary.

-Chris