Community discussions

MUM Europe 2020
 
airmax
just joined
Topic Author
Posts: 2
Joined: Fri Jan 03, 2020 2:00 am

OSPF+MPLS+VPLS

Fri Jan 03, 2020 2:06 am

vpls one side is up and other end is down help please, i have checked LDP and MTU on both routers but still its the same and i m stuck
 
User avatar
brixsat
just joined
Posts: 12
Joined: Thu Nov 07, 2019 11:10 pm
Location: Porto
Contact:

Re: OSPF+MPLS+VPLS

Sun Jan 05, 2020 1:13 pm

We need more info :) so we can help.

Please state config, cenario, etc...
Think outside the box.
 
User avatar
Anumrak
Forum Guru
Forum Guru
Posts: 1176
Joined: Fri Jul 28, 2017 2:53 pm

Re: OSPF+MPLS+VPLS

Mon Jan 13, 2020 3:49 pm

Are you sure you have LDP enabled on every LSR between LER's?
 
User avatar
jprietove
Trainer
Trainer
Posts: 100
Joined: Fri Jun 03, 2016 3:00 pm
Location: Cádiz, Spain
Contact:

Re: OSPF+MPLS+VPLS

Mon Jan 13, 2020 5:08 pm

vpls one side is up and other end is down help please, i have checked LDP and MTU on both routers but still its the same and i m stuck
Check IP address (/32) of both ends appears on routing table
 
User avatar
IPANetEngineer
Trainer
Trainer
Posts: 1102
Joined: Fri Aug 10, 2012 6:46 am
Location: Jackson, MS, USA
Contact:

Re: OSPF+MPLS+VPLS

Sun Jan 19, 2020 10:44 pm

vpls one side is up and other end is down help please, i have checked LDP and MTU on both routers but still its the same and i m stuck

Be sure that the transport address is set on the LDP interface or global LDP options. VPLS requires dynamic targeted LDP sessions which must have a consistent transport address set.

Here is an example of working config for VPLS.

https://stubarea51.net/2018/04/23/wisp- ... c-subnets/
Global - MikroTik Support & Consulting - English | Francais | Español | Portuguese +1 855-645-7684
https://iparchitechs.com/services/mikro ... l-support/ mikrotiksupport@iparchitechs.com

Who is online

Users browsing this forum: No registered users and 7 guests