Code: Select all
[admin@10.20.1] > routing ospf instance export
# may/15/2020 11:38:15 by RouterOS 6.44.5
# software id = 0ZYB-YM1I
#
# model = 960PGS
# serial number = AD8B0BA9D791
/routing ospf instance
set [ find default=yes ] in-filter="" out-filter="" redistribute-connected=\
as-type-2
Code: Select all
[admin@10.20.1] > ip route print
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 ADS 0.0.0.0/0 192.168.88.1 1
1 ADC 10.20.0.0/24 10.20.0.2 10.20.2 0
2 ADC 10.20.2.0/24 10.20.2.1 bridge 0
3 ADC 192.168.88.0/24 192.168.88.234 ether1 0
Code: Select all
[admin@10.20.1] /routing ospf route> print
# DST-ADDRESS STATE COST GATEWAY INTERFACE
0 10.20.0.0/24 intra-area 10 0.0.0.0 10.20.2
1 10.20.2.0/24 intra-area 10 0.0.0.0 bridge
2 172.31.16.0/20 intra-area 10010
3 192.168.88.0/24 imported-ext-2 20