Hello, i have configure a ipsec tunnel from MT to Sophos UTM.
1 tunnel works.
But if I activate a 2nd tunnel SA, the first SA no longer works.
Both connections are shown to me as established in Mikrotik.
The same setup works fine with a Draytek router.
The local Network in Sophos location for the 1. SA is 128.39.0.0/16 and the 2. SA is 10.39.54.0/24
The Mikrotik Network for the IPSEC Network is an vlan 46 in a bridge with Networkaddress 10.43.46.0/24
My second problem is that DHCP relay does not work either.
I checked on the Sophos with tcpdump and there is no DHCP packet arriving.
All other packets go through.