Community discussions

MikroTik App
 
Mitii
just joined
Topic Author
Posts: 2
Joined: Wed Aug 05, 2020 2:35 pm

MP BGP flapping

Wed Aug 05, 2020 2:49 pm

There is an MPLS VPN network of about 30 routers (Cisco and Mikrotik) in the attachment simplified network diagram. 2-a Route Reflector on Cisco 3845. OSPF, BGP, and MP BGP are deployed.
When implementing the Mikrotik CCR1016 router (10.40.254.213), it turned out that if the connection between (10.40.254.217) and (10.40.254.213) is lost, the MP BGP session starts flapping between RR and (10.40.254.213) with a timeout of 180 seconds..
OSPF, LDP, BGP VPNv4 tables are all normal, pings are stable.
It helps to disable the LDP interface and enable it after the MP BGP session is established.
Tried changing OS, changing MSS. Not help.
Very similar to viewtopic.php?t=161858.
While using the script to disable / enable the LDP interface. Can anyone help?
Network.jpg
You do not have the required permissions to view the files attached to this post.
 
Mitii
just joined
Topic Author
Posts: 2
Joined: Wed Aug 05, 2020 2:35 pm

Re: MP BGP flapping

Thu Aug 13, 2020 9:51 am

Changing the MTU in the network section (OSPF in the diagram) helped. There were MPLS MTU 1500, L3 MTU 1484. Became MPLS MTU 1530, L3 MTU 1500. Although the previous values work fine on other parts of the network.

Who is online

Users browsing this forum: No registered users and 17 guests