Community discussions

MikroTik App
 
wagnerloula
just joined
Topic Author
Posts: 3
Joined: Sat Jul 12, 2014 5:58 pm

CCR 2004 - BGP SINGLEHOMED

Wed Sep 09, 2020 6:01 pm

good mornig people! i am changing my box border VYoS that passes currently 1 gb traffic to ccr 2004 which should spend 3 gb in the coming months. what do you think of this new hardware that mikrotik launched? can I use the long-term version?
 
jamescr
just joined
Posts: 2
Joined: Mon Sep 07, 2020 10:29 am

Re: CCR 2004 - BGP SINGLEHOMED

Fri Sep 11, 2020 6:48 am

Just yesterday we swapped a vyos box for a ccr2004 - single homed (we only accept a default route, we don't need a full table). From what I've seen so far it will do what you need with ease. We are using the stable release of Ros 6
 
cmurrayis
Member Candidate
Member Candidate
Posts: 106
Joined: Fri May 15, 2009 4:31 am

Re: CCR 2004 - BGP SINGLEHOMED

Fri Sep 11, 2020 6:58 am

I wouldn't touch the CCR2004 for anything important, All ours have crashed multiple times with no warning or reason why.

We've also had all the ports disconnect and reestablish at once a couple of times
 
wagnerloula
just joined
Topic Author
Posts: 3
Joined: Sat Jul 12, 2014 5:58 pm

Re: CCR 2004 - BGP SINGLEHOMED

Wed Sep 16, 2020 9:15 pm

Just yesterday we swapped a vyos box for a ccr2004 - single homed (we only accept a default route, we don't need a full table). From what I've seen so far it will do what you need with ease. We are using the stable release of Ros 6
hello my friend, thanks for feedback. I will only use default route because I don't need a full route. I saw that a more stable version was released for the ccr 2004 6.46.7 (Long-term, I'm looking forward to the 7x version
 
wagnerloula
just joined
Topic Author
Posts: 3
Joined: Sat Jul 12, 2014 5:58 pm

Re: CCR 2004 - BGP SINGLEHOMED

Wed Sep 16, 2020 9:16 pm

I wouldn't touch the CCR2004 for anything important, All ours have crashed multiple times with no warning or reason why.

We've also had all the ports disconnect and reestablish at once a couple of times

this problem was corrected in the last version

Who is online

Users browsing this forum: No registered users and 17 guests