Tik config:
Fortigate Config:/routing ospf instance
add name=Fortigate router-id=11.10.10.2
/routing ospf area
add area-id=11.10.10.1 instance=Fortigate name=Fortigate
/routing ospf interface
add cost=5 interface=eth4_FGUplink network-type=broadcast
add area=Fortigate network=11.10.10.0/30
<will be adding more networks once OSPF is functioning>
No neighbors listed on either devices and the Tik of course is selected as the DR.config router ospf
set router-id 11.10.10.3
config area
edit 11.10.10.1
next
end
config ospf-interface
edit "Fortigate"
set interface "port1"
next
end
config network
edit 1
set prefix 11.10.10.0 255.255.255.252
next
edit 2
set prefix 192.168.2.0 255.255.255.0
next
edit 3
set prefix 192.168.10.0 255.255.255.0
next
edit 4
set prefix 192.167.1.0 255.255.255.224
next
end
config redistribute "connected"
set status enable
set metric 1
end
What am I missing lol, I wish this was as smiple as OSPF on Cisco devices.