Community discussions

MikroTik App
 
lechat75
just joined
Topic Author
Posts: 24
Joined: Sun Jun 21, 2020 12:24 pm

iBGP+VPNV4 issue : routing OK but prefix unreachable

Sat Dec 12, 2020 4:32 pm

Hello,
Here is my setup:
- 2 CCR1016 sharing an iBGP session (in the main table), no multihop, no routing, (routers is the same VLAN)
- They exchange some prefix in a VRF
- VPNV4 prefix seem to be OK as the appear in the designated routing table
- Next Hop is in the main routing table (which is from my understanding the expected behaviour)
- ARP is OK
- No firewall rules between routers
- No VRF Rules
-All concerned interface in the VRF

But : all VPV4 destinations remain unreachable !
Some screenshot to undestand better

tracert is NOK as i did not get any first NH

Any idea ?

Many thanks
You do not have the required permissions to view the files attached to this post.
 
User avatar
StubArea51
Trainer
Trainer
Posts: 1739
Joined: Fri Aug 10, 2012 6:46 am
Location: stubarea51.net
Contact:

Re: iBGP+VPNV4 issue : routing OK but prefix unreachable

Sat Dec 12, 2020 4:38 pm

VPNv4 requires an MPLS forwarding plane for prefixes to be reachable. Do you have LDP enabled?
 
lechat75
just joined
Topic Author
Posts: 24
Joined: Sun Jun 21, 2020 12:24 pm

Re: iBGP+VPNV4 issue : routing OK but prefix unreachable

Sat Dec 12, 2020 4:42 pm

Thank you
yes I did set up LDP but now removed because it did not change anything.
But maybe this part of my set up was wrong
 
User avatar
StubArea51
Trainer
Trainer
Posts: 1739
Joined: Fri Aug 10, 2012 6:46 am
Location: stubarea51.net
Contact:

Re: iBGP+VPNV4 issue : routing OK but prefix unreachable

Sat Dec 12, 2020 5:04 pm

Here is a blog post I wrote on MikroTik and VPNv4. In this example, the P routers are Juniper but the PEs are MikroTik and using VPNv4

The lab config is included in the article.

Image

https://stubarea51.net/2020/01/22/junip ... 4-interop/
 
lechat75
just joined
Topic Author
Posts: 24
Joined: Sun Jun 21, 2020 12:24 pm

Re: iBGP+VPNV4 issue : routing OK but prefix unreachable

Sun Dec 13, 2020 8:08 pm

Thank you for your help
For some reasons, I had to reconfigure OSPF.
LDP is working and routing is OK

Thanks again

Who is online

Users browsing this forum: No registered users and 12 guests