Hello!
I try to configure dynamic routing with MikroTik.
Now I have working GRE tunnel between opnsense and routerboard.
After start ospf instanses I have corrects routes on opensense. But on MikroTik I have routes without gateway address and interface.
/routing ospf> neighbor print
0 instance=default router-id=172.26.0.1 address=100.100.100.41
interface=vorona-gate priority=1 dr-address=0.0.0.0
backup-dr-address=0.0.0.0 state="Full" state-changes=50 ls-retransmits=0
ls-requests=0 db-summaries=0 adjacency=23m31s
Here we can see, that address 100.100.100.41 (opensense)
But in recieved routes I have:
Why I haven't gateway address here?
Also, I haven't this route in routing table for this reason.
configs:
Tik:
/routing ospf area
set [ find default=yes ] disabled=yes
add area-id=172.16.117.0 name=area1
/routing ospf instance
set [ find default=yes ] router-id=172.16.117.1
/routing ospf interface
add passive=yes
add interface=vorona-gate network-type=point-to-point
/routing ospf network
add area=area1 network=100.100.100.40/30
add area=area1 network=172.16.117.0/24
Opensense:
frr version 7.4
frr defaults datacenter
hostname gate.vorona.su
log syslog
!
interface gre1
ip ospf area 172.16.117.0
!
interface vtnet1
ip ospf area 0.0.0.0
!
router ospf
ospf router-id 172.26.0.1
passive-interface vtnet1
!
ip prefix-list test seq 10 permit 172.26.0.0/28
!
line vty
!
end
Gre interfaces has addresses from 100.100.100.40/30 network
What I'm doing wrong?