Community discussions

MikroTik App
 
VolleyTom
just joined
Topic Author
Posts: 17
Joined: Fri Mar 27, 2020 7:06 pm

VRF Guest - Route to Internet

Sun Apr 25, 2021 10:34 am

Hello,
I have a question, how can a make a default route of my "VRF Guest" if I have only one public internet address.

Configuration:
WAN-Interface: DHCP Client which gets an IP Address (e.g. 200.200.200.200) and a gateway (e.g. 200.200.200.1).
NAT: Chain=srcnat Out-Interface=WAN-Interface action=masquerade
Bridge: Guest inc. Guest-WAN
This configuration is working, if i don't use a VRF.

Now I want to move the Guest-Bridge to a VRF and set a default Route to Internet.
VRF: Guest, including the Bridge Guest
VRF Route: 0.0.0.0/0 to 200.200.200.1@main
Done, but now I would need a NAT/masquerade for this VRF, but I have only ONE public internet address.
I tried
Firewall NAT: routing-mark=Guest out-interface=WAN action=masquerade
This is not working :(

Does somebody know, how I can configure to allow this VRF internet access?

Thanks for your help.

Who is online

Users browsing this forum: No registered users and 19 guests