Im trying to configure dual WAN failover on Mikrotik RB3011. For now both "WAN" ports are DHCP, i have 2 bridges designated to ether1 and ether2 ports and each one have own dhcp client which im simulating "ISP"
Gateway for WAN1: 192.168.238.1
Gateway for WAN2: 10.10.10.254
My Routes:
Hops:
Mangle Rules:
Code: Select all
add chain=output connection-state=new connection-mark=no-mark action=mark-connection new-connection-mark=ISP1_conn out-interface=ether1
add chain=output connection-mark=ISP1_conn action=mark-routing new-routing-mark=to_ISP1 out-interface=ether1
add chain=output connection-state=new connection-mark=no-mark action=mark-connection new-connection-mark=ISP2_conn out-interface=ether2
add chain=output connection-mark=ISP2_conn action=mark-routing new-routing-mark=to_ISP2 out-interface=ether2
I followed this guide: https://help.mikrotik.com/docs/pages/vi ... d=26476608
But problem is when i disconnect "ISP1" everything still works, but when i connect back ISP1 and disconnect ISP2 internet just go down.. Can someone point me what am i doing wrong?
BTW: When im connected to internet for some reason i cannot ping 8.8.8.8 but internet works normally.
Thanks and best regards,