Hello,
recently I have replaced clients TP Link router with mikrotik, set up NAT rules acordingly with previous router and now I have following problem.
Client has on premise mail server hosted on synology NAS in his network.
When he is connecting with outlook from outside local network mail works fine, but when he tries it from local network mail client cannot connect.
The client is connected via domain name "mail.xxxxxxxxx.com".
My guess is that all ports related to mail flow are redirected via NAT to the mailserver so the client cannot get response.
Here is my NAT config.
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1
add action=dst-nat chain=dstnat dst-address-type="" dst-port=993 \
in-interface=ether1 protocol=tcp to-addresses=\
10.10.10.10 to-ports=993
add action=dst-nat chain=dstnat dst-address-type="" dst-port=995 \
in-interface=ether1 protocol=tcp to-addresses=\
10.10.10.10 to-ports=995
add action=dst-nat chain=dstnat dst-address-type="" dst-port=587 \
in-interface=ether1 protocol=tcp to-addresses=\
10.10.10.10 to-ports=587
add action=dst-nat chain=dstnat dst-address-type="" dst-port=465 \
in-interface=ether1 protocol=tcp to-addresses=\
10.10.10.10 to-ports=465
add action=dst-nat chain=dstnat dst-address-type="" dst-port=143 \
in-interface=ether1 protocol=tcp to-addresses=\
10.10.10.10 to-ports=143
add action=dst-nat chain=dstnat dst-address-type="" dst-port=25 in-interface=\
ether1 protocol=tcp to-addresses=10.10.10.10 \
to-ports=25