I cannot get iBGP to establish between two devices on Client's Network. When I copy the configurations into our lab devices, iBGP establishes immediately. There are no firewall rules in place. Routers are communicating over ether6 successfully.
Router A:
/ip address
add address=10.1.0.1 comment="iBGP Router ID" interface=Lo1 network=10.1.0.1
add address=10.2.0.5/29 comment="iBGP Connection to RTR B" interface=ether6 network=10.2.0.0
/routing bgp instance
add as=65531 name="iBGP RTR B" router-id=10.1.0.1
/routing bgp peer
add instance="iBGP RTR B" name="iBGP Peer" remote-address=10.2.0.6 remote-as=65531
Router B:
/ip address
add address=10.1.0.2 comment="iBGP Router ID" interface=Lo1 network=10.1.0.2
add address=10.2.0.6/29 comment="iBGP Connection to RTR A" interface=ether6 network=10.2.0.0
/routing bgp instance
add as=65531 name="iBGP RTR A" router-id=10.1.0.2
/routing bgp peer
add instance="iBGP RTR A" name="iBGP Peer" remote-address=10.2.0.5 remote-as=65531