Long-time Quagga user here albeit newbie RouterOS user - so please be gentle...
I have recently replaced three Quagga boxes with three Mikrotik RB1000 running RouterOS 3.28; our network currently runs IPv4 and IPv4 natively.
From what I can determine, IPv4 BGP works absolutely fine but when I try and add a IPv6 peer into the mix, the router is advertising the IPv4 prefixes learnt from another IPv4 peer to the IPv6 peer.
Config is below:
Code: Select all
[admin@gh-gw1.spilsby.net.uk] > /routing bgp export
# jan/02/1970 21:52:44 by RouterOS 3.28
# software id = 0QXF-KE21
#
/routing bgp instance
set default as=43950 client-to-client-reflection=yes comment="" disabled=no ignore-as-path-len=no name=default out-filter="" \
redistribute-connected=no redistribute-ospf=no redistribute-other-bgp=no redistribute-rip=no redistribute-static=no router-id=\
79.98.39.101
/routing bgp network
add disabled=no network=79.98.32.0/21
add disabled=no network=2a01:568::/32
/routing bgp peer
add address-families=ip comment="" default-originate=never disabled=no hold-time=3m in-filter="" instance=default interface=ether4 \
multihop=no name=gh-ipv4-full-ukgrid nexthop-choice=default out-filter=spilsby-ipv4 remote-address=89.21.0.13 remote-as=39757 \
remove-private-as=no route-reflect=no tcp-md5-key="" ttl=default update-source=89.21.0.14
add address-families=ipv6 comment="" default-originate=never disabled=yes hold-time=3m in-filter="" instance=default interface=sit1 \
multihop=no name=gh-ipv6-full-he nexthop-choice=default out-filter=spilsby-ipv6 remote-address=2001:470:14:95::1 remote-as=6939 \
remove-private-as=no route-reflect=no tcp-md5-key="" ttl=default update-source=2001:470:14:95::2
[admin@gh-gw1.spilsby.net.uk] > /routing prefix-lists export
# jan/02/1970 21:56:57 by RouterOS 3.28
# software id = 0QXF-KE21
#
/routing prefix-lists
add action=accept chain=spilsby-ipv4 disabled=no invert-match=no prefix=79.98.32.0/32 prefix-length=21
add action=accept chain=spilsby-ipv6 disabled=no invert-match=no prefix=2a01:568::/128 prefix-length=32
As the config shows above, the IPv6 peer is currently disabled - all looks normal:
Code: Select all
[admin@gh-gw1.spilsby.net.uk] > /routing bgp advertisements print
PEER PREFIX NEXTHOP AS-PATH ORIGIN LOCAL-PREF
gh-ip... 79.98.32.0/21 89.21.0.14 igp
Code: Select all
[admin@gh-gw1.spilsby.net.uk] > /routing bgp advertisements print
PEER PREFIX NEXTHOP AS-PATH ORIGIN LOCAL-PREF
gh-ip... 79.98.32.0/21 89.21.0.14 igp
gh-ip... 170.35.228.0/22 0.0.0.0 39757,3257,7018,19540 igp
gh-ip... 65.163.214.0/24 0.0.0.0 39757,3257,174,19159 igp
gh-ip... 24.123.160.0/20 0.0.0.0 39757,3356,10796,12262 igp
gh-ip... 153.96.248.0/23 0.0.0.0 39757,3257,680 incomplete
gh-ip... 93.92.248.0/21 0.0.0.0 39757,3257,12301 igp
gh-ip... 216.40.76.0/24 0.0.0.0 39757,3356,32479 igp
gh-ip... 66.185.180.0/24 0.0.0.0 39757,3356,12182,12182,12182,18730 igp
gh-ip... 80.75.172.0/24 0.0.0.0 39757,3257,6453,36992,20858 igp
gh-ip... 212.241.54.0/24 0.0.0.0 39757,3356,286 igp
gh-ip... 204.209.240.0/21 0.0.0.0 39757,3257,852 igp
gh-ip... 68.28.189.0/24 0.0.0.0 39757,3257,1239,10507 igp
gh-ip... 194.116.133.0/24 0.0.0.0 39757,3257,12887,12741,34377 igp
<snip>Am I doing something incredibly stupid here or is this functionality currently known to be broken ?
Suggestions from others who have found a workaround would be very much appreciated!
Regards,
Terry Froy
Spilsby Internet Solutions
