Page 1 of 1

Help with mulitple pptp servers and ospf

Posted: Thu May 06, 2010 3:12 am
by Equis
Hello

Currently I have

Our Customer Backhaul - Tower at Office - PPTP server - Core router - Internet

I summarize with an area range on PPTP server to routing table is small and not distributing a /32 route for every pptp session
I need to add another PPTP server with the same IP range pool for PPTP

So I will have

Our Customer Backhaul - Tower at Office - PPTP server 1+ PPTP server 2 - Core router - Internet



I need PPTP server 1 to advertise the connected /32's to PPTP server 2 and the Tower at Office and the core router.
I need the Tower at office and Core router to only advertize the summery for both PPTP servers.

So in summery PPTP server 1 and 2 will advertise 203.0.0.1/32 - 203.0.0.1.255/32 to both Tower at Office and Core router.
Tower at Office and Core router advertise 203.0.0.0/24 to Our Customer Backhaul and the Internet

Does anyone know how to do this?

Re: Help with mulitple pptp servers and ospf

Posted: Thu May 06, 2010 5:15 pm
by mrz
You can put both PPTP servers in one OSPF are, that way all /32 routes will be visible to both PPTP servers.

Re: Help with mulitple pptp servers and ospf

Posted: Fri May 07, 2010 2:26 am
by Equis
I have done that but they still distribute the /32's to the rest of the network also instead of summarizing.