Community discussions

 
User avatar
gustkiller
Member
Member
Topic Author
Posts: 418
Joined: Sat Jan 07, 2006 5:15 am
Location: Brazil
Contact:

Traffic Flow ( netflow) Autonomous system information

Mon Aug 02, 2010 11:30 pm

Hi,


there's any way to mikrotik "stamp" the AS information in trafficflow ? like cisco running bgp?

Thanks!
Mikrotik Certified Consultant
 
User avatar
Eising
Member Candidate
Member Candidate
Posts: 272
Joined: Mon Oct 27, 2008 10:21 am
Location: Copenhagen, Denmark

Re: Traffic Flow ( netflow) Autonomous system information

Fri Aug 06, 2010 8:42 am

There's currently no way of doing that, however I've suggested it to MikroTik before and they were positive towards implementing it, so I suggest you (and everyone else who need this) start e-mailing support@mikrotik.com about it.
The road to hell is paved with good intentions.
 
User avatar
gustkiller
Member
Member
Topic Author
Posts: 418
Joined: Sat Jan 07, 2006 5:15 am
Location: Brazil
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Fri Aug 06, 2010 4:46 pm

that was exectly what i did last week, opened a support ticket about these feature.
Mikrotik Certified Consultant
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1821
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Sun Aug 08, 2010 8:40 am

I have emailed them too. This would be very useful in combination with nfacct
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
gustkiller
Member
Member
Topic Author
Posts: 418
Joined: Sat Jan 07, 2006 5:15 am
Location: Brazil
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Sun Aug 08, 2010 3:57 pm

we´re now connecting to a mutiple peers ( transit) and IXPs. So the ASN information is very useful to know when or where buy more access to Ixp or transport networks , or who AS is better to do some bidirectional traffic agreements.
Mikrotik Certified Consultant
 
alexandrecorrea
just joined
Posts: 20
Joined: Fri Sep 22, 2006 6:18 pm
Location: Sacramento, MG, Brasil
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Wed Aug 25, 2010 5:46 am

also sent two emails to support, but I believe they will not implement this in future versions.

This option is essential for anyone who uses BGP with IXP's...


I'm pulling down all mikrotik routers, switching back to cisco boxes because i need AS info on flow !! I like mikrotik as router.. BUT some features need more priority !! (like exportin AS info in flows) and run BIRD as bgp daemon !!!


:)
 
User avatar
Eising
Member Candidate
Member Candidate
Posts: 272
Joined: Mon Oct 27, 2008 10:21 am
Location: Copenhagen, Denmark

Re: Traffic Flow ( netflow) Autonomous system information

Thu Aug 26, 2010 4:04 pm

MikroTik needs to fix it's netflow in general. Every time I try it, I get a new bug. I have enabled it on four different BGP routers all with four different non-reproducible bugs.
The road to hell is paved with good intentions.
 
agshekeloh
just joined
Posts: 10
Joined: Tue May 03, 2011 11:09 pm
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Thu Oct 20, 2011 5:33 pm

Mikrotik support answered my query on this.

"currently it is not possible. We will evaluate this feature and possibly add to
planned feature list."

So, there's the definitive answer.
 
User avatar
gustkiller
Member
Member
Topic Author
Posts: 418
Joined: Sat Jan 07, 2006 5:15 am
Location: Brazil
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Fri Oct 21, 2011 9:37 pm

that will be awesome!
Mikrotik Certified Consultant
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1821
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Fri Oct 21, 2011 11:35 pm

Mikrotik, please add this feature!!!
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
alexjhart
Member Candidate
Member Candidate
Posts: 192
Joined: Thu Jan 20, 2011 8:03 pm

Re: Traffic Flow ( netflow) Autonomous system information

Sun Mar 03, 2013 7:00 pm

+1
I am surprised this hasn't been implemented yet.
-----
Alex Hart

The Brothers WISP
 
User avatar
EMOziko
Member Candidate
Member Candidate
Posts: 129
Joined: Mon Aug 23, 2010 9:42 pm
Location: Georgia

Re: Traffic Flow ( netflow) Autonomous system information

Sun Mar 10, 2013 4:11 pm

I was searching about this and just found this thread. Please Mikrotik add this feature.
We want new versions of The Dude!!!!!!!
 
AlArenal
Member Candidate
Member Candidate
Posts: 131
Joined: Thu Aug 01, 2013 5:24 pm
Location: Iserlohn, Germany

Re: Traffic Flow ( netflow) Autonomous system information

Thu Sep 26, 2013 4:00 pm

+1 for BGP AS in flows
 
hapi
Member Candidate
Member Candidate
Posts: 223
Joined: Fri Mar 11, 2011 11:21 am
Location: Czech Republic

Re: Traffic Flow ( netflow) Autonomous system information

Thu Sep 26, 2013 4:14 pm

and add CISCO NAT (NEL) (NAT event logging) to traffic flow.
 
mhviper
newbie
Posts: 36
Joined: Wed Sep 25, 2013 4:59 am

Re: Traffic Flow ( netflow) Autonomous system information

Thu Dec 05, 2013 6:54 pm

bump this. It's an essential feature for everyone how is really working with ccr.
 
robertik
just joined
Posts: 10
Joined: Tue Dec 04, 2012 2:45 pm

Re: Traffic Flow ( netflow) Autonomous system information

Wed Apr 02, 2014 4:53 pm

+1 - with 20 peers it is really needed
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 737
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Sun Apr 06, 2014 2:36 am

*bump*
-----
Mike Hammett

The Brothers WISP
 
mhviper
newbie
Posts: 36
Joined: Wed Sep 25, 2013 4:59 am

Re: Traffic Flow ( netflow) Autonomous system information

Thu Feb 26, 2015 4:31 pm

*bump because it's important*
 
unixman
just joined
Posts: 2
Joined: Mon Dec 30, 2013 7:43 pm

Re: Traffic Flow ( netflow) Autonomous system information

Tue May 26, 2015 8:45 pm

Can't agree more. Writing a netflow application, it is fundamental. Go for it !
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 737
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Traffic Flow ( netflow) Autonomous system information

Tue Jun 02, 2015 4:54 pm

Also, can we have S-Flow?
 
neptune
just joined
Posts: 9
Joined: Tue Jul 09, 2013 3:00 pm

Re: Traffic Flow ( netflow) Autonomous system information

Mon Aug 10, 2015 3:49 pm

*bump because it's important*
+1
 
neptune
just joined
Posts: 9
Joined: Tue Jul 09, 2013 3:00 pm

Re: Traffic Flow ( netflow) Autonomous system information

Mon Aug 10, 2015 3:55 pm

I could not agree more.

For the moment I have to configure a dedicated box to peer with all my EP routers to know where is my traffic going through
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1821
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Thu Aug 13, 2015 1:28 pm

5 years later, still waiting...
 
User avatar
IPANetEngineer
Trainer
Trainer
Posts: 1053
Joined: Fri Aug 10, 2012 6:46 am
Location: Jackson, MS, USA
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Thu Aug 13, 2015 3:58 pm

+1 for this and BGP session status in SNMP.

Oh and OAM for ethernet.....ok i'll stop now :D
Global - MikroTik Support & Consulting - English | Francais | Español | Portuguese +1 855-645-7684
https://iparchitechs.com/services/mikro ... l-support/ mikrotiksupport@iparchitechs.com
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1821
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Thu Aug 13, 2015 4:13 pm

+1 for this and BGP session status in SNMP.

Oh and OAM for ethernet.....ok i'll stop now :D
Strange, I have emailed Mikrotik support requesting both of those features.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 908
Joined: Tue Oct 11, 2005 4:53 pm

Re: Traffic Flow ( netflow) Autonomous system information

Sat Nov 14, 2015 5:21 pm

+1 :)
 
jmginer
Member Candidate
Member Candidate
Posts: 115
Joined: Tue Dec 11, 2012 4:56 am

Re: Traffic Flow ( netflow) Autonomous system information

Fri Dec 18, 2015 9:34 pm

I agree :)
+1
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 737
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Sat Dec 19, 2015 3:32 am

IPFIX and S-Flow too.
-----
Mike Hammett

The Brothers WISP
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1821
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Sat Dec 19, 2015 4:52 am

IPFIX and S-Flow too.
+1 sflow is a must for rapid DDoS detection.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 737
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Sat Dec 19, 2015 5:11 am

Flowspec goes along with DDoS mitigation of flows.
-----
Mike Hammett

The Brothers WISP
 
User avatar
ploquets
Member Candidate
Member Candidate
Posts: 128
Joined: Tue Nov 17, 2015 12:49 pm
Location: Uruguaiana, RS, Brazil
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Mon Feb 08, 2016 12:22 am

+1 for AS information on netflow!!!
 
chubbs596
Frequent Visitor
Frequent Visitor
Posts: 51
Joined: Fri Dec 06, 2013 6:07 pm

Re: Traffic Flow ( netflow) Autonomous system information

Mon May 23, 2016 10:31 am

+1 for AS information on netflow!!!
 
User avatar
bajodel
Long time Member
Long time Member
Posts: 545
Joined: Sun Nov 24, 2013 8:30 am
Location: Italy

Re: Traffic Flow ( netflow) Autonomous system information

Tue May 24, 2016 9:48 am

+1 ..
 
asturmas
just joined
Posts: 14
Joined: Mon Jan 27, 2014 8:50 pm

Re: Traffic Flow ( netflow) Autonomous system information

Fri Jun 10, 2016 5:04 am

+1 feature for ROSv7 i think..
 
riaanmaree
Frequent Visitor
Frequent Visitor
Posts: 66
Joined: Thu Aug 31, 2006 10:42 pm
Location: Johannesburg, South Africa
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Thu Jun 16, 2016 11:17 pm

We also need this

Sent from my SM-G925F using Tapatalk
 
User avatar
tomasi
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Fri Oct 03, 2014 6:40 pm
Location: Brazil
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Tue Aug 16, 2016 8:29 pm

+1 :D
 
ropebih
Member Candidate
Member Candidate
Posts: 109
Joined: Tue May 22, 2007 5:35 pm

Re: Traffic Flow ( netflow) Autonomous system information

Sat Sep 10, 2016 6:00 pm

+1 sflow
 
borisk
Frequent Visitor
Frequent Visitor
Posts: 97
Joined: Mon Jul 04, 2016 10:02 pm
Location: Nizhniy Tagil, Russia

Re: Traffic Flow ( netflow) Autonomous system information

Sun Sep 11, 2016 7:41 pm

+1 and bird!
 
bmv
just joined
Posts: 17
Joined: Sun Aug 15, 2010 1:15 pm

Re: Traffic Flow ( netflow) Autonomous system information

Tue Sep 13, 2016 10:55 am

+1.
Have enquired separately on this forum before about this I believe.
 
User avatar
omidkosari
Trainer
Trainer
Posts: 616
Joined: Fri Sep 01, 2006 4:18 pm
Location: Iran , Karaj
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Mon Nov 21, 2016 4:15 pm

+1 or a workaround !!
MTCNA , MTCRE, MTCWE, Mikrotik Certified Trainer
 
User avatar
ploquets
Member Candidate
Member Candidate
Posts: 128
Joined: Tue Nov 17, 2015 12:49 pm
Location: Uruguaiana, RS, Brazil
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Thu Jan 19, 2017 10:42 pm

bump!
 
riaanmaree
Frequent Visitor
Frequent Visitor
Posts: 66
Joined: Thu Aug 31, 2006 10:42 pm
Location: Johannesburg, South Africa
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Sat Jan 28, 2017 5:09 pm

Yup. Still waiting for this feature...

Sent from my SM-G925F using Tapatalk
 
mmabob
just joined
Posts: 6
Joined: Wed May 28, 2014 5:46 am

Re: Traffic Flow ( netflow) Autonomous system information

Fri Jul 14, 2017 6:41 pm

+1

We need this feature.
 
berlo
newbie
Posts: 43
Joined: Sat May 13, 2017 5:11 pm

Re: Traffic Flow ( netflow) Autonomous system information

Mon Jul 17, 2017 3:06 am

As workaround configure on vm/server nprobe + ntopng. You can create virtual interface. For example create a file /etc/ntopng/nprobe-mikrotik.conf
--zmq="tcp://*:42165"
--collector-port=9996
-n=none
-i=none
where 9996 is the port where you receive flow.

create ntopng.conf file and insert


-G=/var/run/ntopng.pid
-i=tcp://127.0.0.1:42165

start it and connect to https://yourserver:3000

Go under Hosts -> Autonomous Systems and you will be able to see flow grouped for AS
 
alfredo
newbie
Posts: 36
Joined: Wed Jul 01, 2015 3:06 pm

Re: Traffic Flow ( netflow) Autonomous system information

Wed Aug 23, 2017 3:00 pm

+1, it would be awesome to get AS numbers in netflow. As others said, any serious traffic analysis at the AS level is not possible without this.

Who is online

Users browsing this forum: No registered users and 13 guests