Look at the attached screenshot please.
Ether5 with IP address (220.127.116.11/24) has no cable plugged in.
However (what is obviously a bug for me) connected route 18.104.22.168/24 for ether5 is marked as unreachable but still active in routing table preventing static blackhole route (SB) with metric 10 to be installed instead.
Please explain or let me know what should be done in router configuration so that connected routes will not be in routing table when interface is physically down.
This is very frustrating because it's very critical for many network designs to work properly especially where VRRP is used together with OSPF and this works on other vendor's equipment .
Equipment where bug has been seen is RB450 and RB750 with last 5.8 version but I suspect it to be on all the Mikrotiks.
Thanks a lot.
Looking forward to your thoughts.