hello and happy new year to all.
i am trying to make a failover solutions with two routers and one provider,
router E1 primary has wan ip address 10.10.10.10/30 gateway 10.10.10.9 this is active router
router E2 backup has wan ip address 10.10.10.14/30 gateway 10.10.10.13 this is backup router
as64500 , my routed net 192.168.10.32/27 192.168.10.64/27. now i have both bgp on both routers up runing , what i need is ibgp between E1 <> E2 in case that primary uplink pn E1 router will fail E1 should take route from E2 , i have also a direct interface between two routers cnnected, ip E1 (primary router) 10.0.98.1/24 and E2 (secondary router) 10.0.98.2/24.
on lan side i have vlans and vrrp up, this is working ok , each router is connected with 1 managed layer 2 switcher crosconnected with STP active,
pls i need help to configure ibgp , i have tryed some config from what i have read form forums tutorials etc, but this is first time for me with bgp and i am not clear what i shoul do.
thank you t all